Product overview

Electric diaphragm pump is a new type of pump, in recent years, due to a breakthrough in the diaphragm material,more and more industrialized countries using this type of pump, replace part of centrifugal pump, screw pump, used in the petrochemical, ceramics, metallurgy, electric diaphragm pump product design my unit the production ofreference American Abel prototype, DBY type diaphragm pump is suitable for low pressure, the outlet pressure lower than 3k9f / cm2.

Performance characteristics

One, without irrigation water, self absorption capacity of up to 7 meters.

Two, the performance is good, less than 10 mm in diameter particles, and so can effortlessly through the mud.

Three, because the diaphragm is the transmission medium and the mechanical transmission parts are separated, so the media will not leak out. And the pump itself, no seal,greatly prolongs the service life. According to the different media, divide into chloroprene rubber, fluorine rubber,nitrile rubber, can meet the requirements of different users.

Four, the medium flows through the part of the pump body,can according to user requirements, divided into cast iron,stainless steel, rubber lining, the motor is divided into common type and explosion-proof type two.

Main uses

Pumping peanut butter, pickled cabbage, Mashed Potato,sausage, chocolate, hops. Syrup

Paint, paint, glue, adhesive,

A variety of tile, porcelain, tiles and ceramic glaze

All kinds of abrasive, corrosive agents, cleaning grease

A variety of highly toxic, flammable, volatile liquid

Various sewage, cement grout and mortar

All kinds of acid, alkali, strong corrosion liquid

Various viscous slurry, emulsion, cream cosmetics

Before a variety of solid-liquid separation equipment device to send