网站首页 关于我们 新闻动态 产品中心 生产厂区展示 各地合作商 使用案例 联系我们
+   不锈钢管道泵
+   氟塑料泵
+   隔膜泵
+   塑料泵
+   金属泵,不锈钢泵,铸铁泵
+   管道泵
+   阀门
+   玻璃钢泵
+   真空泵系列
+   计量泵
+   风机
+   公司执照
+   机械密封
+   各地合作商
+   凸轮转子泵
+   中开双吸泵
+   蠕动泵

成都川氟泵阀有限公司

电话:13086683933
联系人:潘经理  
地址:成华区羊子山路88号

 
您现在的位置: 产品中心
衬氟放料阀
发布时间:2014/6/18 21:58:29   打印本页 || 关闭窗口

一、性能

公称通径:DN15~250(mm)
        公称压力
:PN1.6(Mpa)
        使用温度:-20~180℃

        
结构形式:直通式
        
连接方式:法兰
     
阀体材料:铸钢、不锈钢 驱动装置:手动、气动执行器、电动执行器
  适用介质:强酸、强碱、强氧化性介质 
驱动装置:手动、气动执行器、电动执行器
  适用介质:强酸、强碱、强氧化性介质

   
二、耐腐蚀性
1.聚四氟乙烯与金属粘结性优良,抗拉性一般,耐稀酸、浓酸等。
2.使用介质如颗粒、油品、纸浆、二氧化碳气(不锈钢材质可使用温度-60℃-232℃)。
3.严禁使用含氟离子液体(如HF等)也不能用强碱及磷酸(温度小于150℃,浓度>30%)。
4.不锈钢的一般工作温度为-5℃-225℃,压力范围0.6-1.6MPA,超过此规定订货时要说明

A, performance

Nominal diameter: DN15~250 (mm)

Nominal pressure: PN1.6 (Mpa)

Operating temperature: -20~180 ℃

Structure: a straight through type

Connection: flange

Body material: steel, stainless steel drive device: manual,pneumatic actuator, electric actuator

Suitable medium: acid, alkali, strong oxidizing medium

Driver: manual, pneumatic actuator, electric actuator

Suitable medium: acid, alkali, strong oxidizing medium

Two, corrosion resistance

1 Teflon and metal excellent adhesion, tensile strength,resistance to dilute acid, concentrated acid.

2 the use of media such as grain, oil, paper pulp, carbon dioxide gas (stainless steel material can use thetemperature -60 ℃ -232 ℃).

3 is strictly prohibited the use of fluoride ionic liquids (such as HF) nor with alkali and acid (temperature less than 150 ℃, concentration > 30%).

The general working temperature of 4 stainless steel was -5℃ -225 ℃, the pressure range of 0.6-1.6MPA, more thanthe prescribed order to show

 
 
  下一个:衬四氟 PO PE管道
  打印本页 || 关闭窗口

成都川氟泵阀有限公司  联系人:潘经理   电话:13086683933
 邮箱:527582096@qq.com 地址:成都成华区羊子山路88号 
备案号:蜀ICP备14013282号-1